Debunking the Myths
Let's face it. We've all seen CSI, Bones and a host of other forensic TV shows where investigators are able to find evidence anytime and any place they like. The reality is that it's (unfortunately) not as easy as TV makes it out to be. This lens exists to help people understand how to use forensic flashlights and headlamps, which are also referred to as forensic light sources (FLS) or alternate light sources (ALS).
I promise to keep things as simple as possible here for ya. I won't discuss lasers here as they can be extremely expensive and generally aren't portable.
I promise to keep things as simple as possible here for ya. I won't discuss lasers here as they can be extremely expensive and generally aren't portable.
3 Things You'll Need
Forensics is a science and we'll need the right tools and conditions in order to visualize evidence.
There are 3 absolute requirements.
1) It must be dark (little ambient light)
2) Must use the correct wavelength
3) Must use the correct filter or camera lens
Fluorescent dyes or powders (like Luminol) help a great deal, when looking for fingerprints.
There are 3 absolute requirements.
1) It must be dark (little ambient light)
2) Must use the correct wavelength
3) Must use the correct filter or camera lens
Fluorescent dyes or powders (like Luminol) help a great deal, when looking for fingerprints.
Darkness (little ambient lighting)
Pretty straightforward....the darker it is, the better we'll see evidence. Ambient lighting, a fancy name for background lighting in a room, diminishes the amount of fluorescence or absorption we see.
Evidence can easily be missed if there is too much ambient light.
The correct wavelength is dependent upon what evidence you're looking for
There is much debate regarding the best wavelength(s) to use. Reasons for this include varying air density around the globe, differences in how people were trained and user's personal preferences. Evidence in the dry Arizona air will keep differently than evidence in the more humid southeast. In addition, the ethnicity of a person along with the background the evidence rests on will also contribute to different wavelengths being preferred in different scenarios. For example, 450 nm (blue light) might serve you well to find blood at Scene A while 470 nm might be better at finding blood at Scene B.
We select the appropriate wavelength(s) based upon the evidence being sought. Wavelengths are expressed in nanometers (nm) and there is a range of wavelengths associated with each color. The ranges I include below are arbitrary. I'm limiting the colors below to the most commonly used in Forensics. Blue and UV light are the two commonly used.
UV light (200 to 420 nm)
Used to find bruising, serological evidence (semen, saliva, urine), general crime scene search (hairs, fibers, etc.)
Blue light (450 to 475 nm)
Used to find blood-spatter, GSR (gun shot residue), general crime scene search (hairs, fibers, etc.)
Cyan (a blue/green color in the 480 to 500 nm range)
Used to find latent prints (AKA fingerprints)
Green light (510 to 540 nm)
Used to find latent prints (AKA fingerprints)
IR light (770 to 2,500 nm; AKA near-IR)
Used to find bruising, GSR (gun shot residue), dried blood on dark clothing
Choosing the right filter or goggle
Filters block out the light that is not absorbed by the evidence. Forensic filters are either camera lenses, goggles or plastic sheets of a particular tint. The filter we use is dependent on what evidence we are looking for along with the wavelength we're using. If you have a camera, use a colored filter. If you're an investigator without a camera, use colored goggles.
Red, orange, yellow and clear filters are used in forensics. Orange and red are the most useful.
Yellow and orange filters are used with blue, UV, green and cyan light.
A red filter is only used with green light.
A clear is only used with UV light.
IR light is a little tricky. No filter or goggle will yield results. A forensic camera with infrared capabilities is required in order to visualize any evidence. Camera manufacturers like Fuji (IS Pro) and Nikon (D90) make such models.
Recommended Operational Distance
Forensic light sources vary greatly in price....pen lights can be as little as $10 USD while high-end lasers can costs upwards of $30,000 USD. Some of the newer LED light sources on the market represent the best value and most cost between $20 and $800 per wavelength. The more powerful the light, the farther you can be from evidence and see it.
You'll need to be very close (within 1 ft) to the evidence to see it with a weak light source. These can still work well when looking into a small, controlled area like a computer keyboard. A very powerful light source can allow you to be 30 ft away from the evidence and still see it. These are best used in larger, uncontrolled scenes.
Some manufacturers, like FoxFury, list their recommended operational distances (RODs).
Scout Series: ROD = 2 ft
Command Series: ROD = 3 ft
PRO Series: ROD = 12 ft
HammerHead Series: ROD = 10 ft
MF Series: ROD = 20 ft
Nomad Series: ROD = 30 ft
Base your buying decision on how much light is needed.
You'll need to be very close (within 1 ft) to the evidence to see it with a weak light source. These can still work well when looking into a small, controlled area like a computer keyboard. A very powerful light source can allow you to be 30 ft away from the evidence and still see it. These are best used in larger, uncontrolled scenes.
Some manufacturers, like FoxFury, list their recommended operational distances (RODs).
Scout Series: ROD = 2 ft
Command Series: ROD = 3 ft
PRO Series: ROD = 12 ft
HammerHead Series: ROD = 10 ft
MF Series: ROD = 20 ft
Nomad Series: ROD = 30 ft
Base your buying decision on how much light is needed.
Wavelength specificity
This issue is given little attention but it's important to note. We're talking here about how accurate/specific a wavelength is.The scientific name for this is spectral brightness. So much emphasis is put on the exact wavelength of a light source but the wavelength specificity is often ignored. A more precise wavelength means more of the desired colored light will directed at the evidence, which translates into better observed fluorescence/absorption (and less wasted light).
Some older halogen lights have a wavelength specificity of plus or minus 50 nm. A 470 nm light with that specificity would therefore be putting out everything from 420 nm (in the UV spectrum) to 520 nm (in the green spectrum). Like a bell curve, most of the light would still be blue (between 450 and 490 nm) but a considerable amount (20% or so) of light will not be and will therefore be in the non-usable range.
Newer LED light sources are more accurate and some even have specificity of plus or minus 3 nm. That same 470 nm would put out between 467 and 473 nm, which is exclusively blue. More light would therefore be absorbed, which would make it easier to see evidence and take pictures.
Some older halogen lights have a wavelength specificity of plus or minus 50 nm. A 470 nm light with that specificity would therefore be putting out everything from 420 nm (in the UV spectrum) to 520 nm (in the green spectrum). Like a bell curve, most of the light would still be blue (between 450 and 490 nm) but a considerable amount (20% or so) of light will not be and will therefore be in the non-usable range.
Newer LED light sources are more accurate and some even have specificity of plus or minus 3 nm. That same 470 nm would put out between 467 and 473 nm, which is exclusively blue. More light would therefore be absorbed, which would make it easier to see evidence and take pictures.
Fingerprints on a soda can
Fingerprints on a gun
Detecting drugs with lights
Hands-Free vs. Hand-Held Light Sources
Each has its benefits but both will get the job done. We'll list the pros and cons of each below:
Hands-Free Light Sources
These include headlamps and utility lights that can be clipped on to the investigator.
Pros:
Provides two free hands for multi-tasking (taking notes, lifting, etc)
Reduces cross contamination
Provides light wherever you look
Can sometimes give a wider beam angle
Cons:
Not as powerful
Tend not to be as focused
Extra weight on head
Harder to switch wavelengths
Pros:
Provides two free hands for multi-tasking (taking notes, lifting, etc)
Reduces cross contamination
Provides light wherever you look
Can sometimes give a wider beam angle
Cons:
Not as powerful
Tend not to be as focused
Extra weight on head
Harder to switch wavelengths
Hand-Held Light Sources
Flashlights are far more commonly used in forensics.
Pros:
More powerful
Light tends to be more focused
Easier to change wavelengths
Cons:
1 hand is devoted to holding light
Possible cross-contamination if light placed on floor, counter
Pros:
More powerful
Light tends to be more focused
Easier to change wavelengths
Cons:
1 hand is devoted to holding light
Possible cross-contamination if light placed on floor, counter
Lights in Forensic TV Shows
Blue light typically show up better on TV compared to ultraviolet. The picture above is of the FoxFury HammerHead 470 nm (blue light) ALS flashlight used in a scene from the hit TV show Bones.
How It All Works
Larger forensic evidence can typically be found without needing a light source. Light sources can help locate smaller evidence including biological fluids, hairs, fibers, etc. that are hard to see with the naked eye. When done properly, light emitted from the correct light source enables evidence to be seen through a filter (lens, goggles). This section gives a quick and simple overview of the light physics involved.
Light emitted from a light source is either absorbed by the evidence or scattered (reflected back to the user, etc.). Filters (lenses, goggles) block the scattered light and allow us to see only the absorbed light (fluorescence)...provided we're using the correct wavelength and lens for the given type of evidence.
Practically speaking, say we use a 395 nm UV light source to look for hair. We aim the light where we think the evidence could be. UV light gives off a purple/violet light . Hair would absorb some of the UV light and re-emit it at a longer wavelength (higher than 395 nm). In this instance, hair will appear green or yellow
(maybe even red) when seen through an orange filter. Green (~520 nm) and yellow (~570 nm) are longer wavelength than UV (~395 nm). The filter blocks out the UV and other non-absorbed light and allows the evidence to stand out. Using no (or the incorrect) filter would result in a great deal of back scatter being seen, which would make it very difficult to see the evidence.
Light emitted from a light source is either absorbed by the evidence or scattered (reflected back to the user, etc.). Filters (lenses, goggles) block the scattered light and allow us to see only the absorbed light (fluorescence)...provided we're using the correct wavelength and lens for the given type of evidence.
Practically speaking, say we use a 395 nm UV light source to look for hair. We aim the light where we think the evidence could be. UV light gives off a purple/violet light . Hair would absorb some of the UV light and re-emit it at a longer wavelength (higher than 395 nm). In this instance, hair will appear green or yellow
(maybe even red) when seen through an orange filter. Green (~520 nm) and yellow (~570 nm) are longer wavelength than UV (~395 nm). The filter blocks out the UV and other non-absorbed light and allows the evidence to stand out. Using no (or the incorrect) filter would result in a great deal of back scatter being seen, which would make it very difficult to see the evidence.
Wavelengths that FoxFury uses
FoxFury's ALS utilize LEDs and are available in specific wavelengths. In some cases, we may offer a model in two different wavelengths for one light color. We selected these wavelengths after doing extensive testing with different evidence in various dilutions. We also offer white lights as well.
UV - 380 nm, 395 nm
Blue - 450 nm, 470 nm
Cyan - 495 nm
Green - 525 nm, 532 nm
IR - 850 nm
Forensic light are seen almost every episode of Court TV shows like CSI and bones. Sometimes they are great lights in the laboratory, while smaller lights are specified in field and laboratory.
ReplyDeletecomputer hacking forensic investigator